Multi-gap Resistive Plate Chamber Research Articles

Particle detectors based on glass: toward the Multigap Resistive Plate Chambers

Glass found a large application in particle physics, and it can be considered as a key turning point in the technology of gaseous detectors, in particular in the development that lead from parallel plate chambers to resistive plate chambers and multigap resistive plate chambers (MRPCs). One of the crucial parameters to take into account when building such a detector is the resistivity of the material used to collect the signal produced by a particle crossing the detector. In this paper a (not comprehensive) history of the gaseous detectors will be presented, in order to describe the use of glass in the MRPC, including a few examples of experiments making use of this technology.

Ecological transition for the gas mixtures of the MRPC cosmic ray telescopes of the EEE Project

The Extreme Energy Events (EEE) Collaboration is fully involved in an ecological transition. The use of the standard gas mixture, C2H2F4 + SF6, has stopped in favor of an alternative green mixture based on C3H2F4 with the addition of He or CO2.The choise of these new mixtures is motivated by the significant lower Global Warming Potential (GWP) to reduce the emission of gases potentially contributing to the greenhouse effect.The EEE experiment consists of 61 muon telescopes based on Multigap Resistive Plate Chambers (MRPCs), each telescope composed of 3 chambers filled with gas.Several EEE detectors are today completely fluxed with the new ecological mixture. This contribution will report recent results about the telescope performance obtained from studies with the eco-friendly alternative mixture carried out in the last years.

A very thin MRPC developed for TOF-PET

PET (Positron Emission Tomography) is a medical molecular imaging modality employed in cancer diagnosis and monitoring. Multi-gap Resistive Plate Chambers (MRPCs) are utilized in Time of Flight (TOF)-PET due to their superior time resolution. Our research group has successfully developed a 4-chamber 32-gap MRPC prototype with 0.128 mm gap thickness. The measured time resolution for cosmic rays is 20 ps, while the time resolution for the time difference between 0.511 MeV photon pairs is 193 ps Full Width at Half Maximum (FWHM). The 23.6 mm thickness of the MRPC prototype will affect the time resolution. To investigate the influence of the number and total thickness of gas gaps on the time resolution, Geant4 software is used to simulate the interaction between particles (such as cosmic rays and photons) and MRPC detectors. Most of the gamma photons interact with the resistive plates in MRPCs. It is ejected mostly a Compton electron into one gas gap, causing the gas ionization. In this paper, two 8-gap MRPC prototypes with 0.128 mm gap thickness and 4.2 mm total thickness are fabricated and tested. The time resolution of 39 ps for cosmic rays and 166 ps FWHM for 0.511 MeV photons is obtained using the fast front-end amplifier and waveform acquisition system. So, a real time PET image can be obtained with a pair of MRPCs, and the detection efficiency for gamma can be improved by increasing the number of thin MRPCs.

Operation of a low resistivity glass MRPC at high rate using ecological gas

The Multigap Resistive Plate Chamber (MRPC) is a gaseous detector that has low building costs and excellent timing performances. It is usually operated using a mixture of C2F4H2 and SF6, which have very high Global Warming Potential (GWP) values (1430 and 23,900 respectively). The ecological HFO-1234ze (C3F4H2), GWP <7, was investigated if it could be a viable alternative to the standard gas mixture. In this work, we present the performances of an MRPC with 10 gaps of 235μm width, built using 0.5 mm thick plates of low resistive glass. This detector was also operated using the standard gas mixture for comparison. At low particle rate, this detector reaches an efficiency of 98% and a time resolution of around 70 ps for the two mixtures of gases. We observed no degradation of its performances when a limited size of its active area is exposed to particle rates up to 63 kHz/cm2.

Toward an environmental friendly operation of the CBM-TOF system

The future fixed target high-rate compressed baryonic matter (CBM) experiment is one of the experimental pillars of the Facility for Antiproton and Ion Research (FAIR) located in Darmstadt/Germany. In order to provide an excellent particle identification (PID) of charged hadrons, the CBM-time-of-flight (TOF) group has developed a concept of a 120 m2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^2$$\\end{document} large TOF wall with a system time resolution below 80 ps based on multi-gap resistive plate chambers (MRPC). Currently, timing MRPC systems are operated with a gas mixture based on tetrafluoroethane (R134a, C2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}H2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_2$$\\end{document}F4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_4$$\\end{document}) with additions of few vol% quencher gases, e.g., sulfur hexafluoride (SF6\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_6$$\\end{document}) or/and isobutane (i-C4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_4$$\\end{document}H10\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$_10$$\\end{document}). Unfortunately, these gas mixtures have a high global warming potential (GWP) in the order of 1500, and therefore, strategies to reduce the environmental impact have to be developed. The various possibilities, including studies on eco-friendly gases, and the considered strategy by the CBM-TOF group will be elaborated in this article.

Sealed (zero gas flow) resistive plate chambers

The phase-out of hydro-fluorocarbons, due to their high Global Warming Potential (GWP), affecting the main gas used in Resistive Plate Chambers (RPCs), tetrafluoroethane C_2H_2F_4, has increased pressure on existing systems and imposes strong restrictions on its use in new systems. A possible solution to the problem is the substitution of this gas by others with a much lower GWP. Another possibility would be sealed RPCs, i.e., RPCs that do not require a continuous gas flow for their operation. This paper shows the construction structure and test results of a sealed multi-gap RPC operated without gas flow for about 1 year. The results show a stable efficiency of more than 95% and a streamer percentage of less than 1%. The spatial distribution of the hits, the mean charge and the probability of streamers do not reveal significant structures. Similarly, they do not seem to be dependent on operating time.

Beam test result of the sealed MRPC prototype for CEE-eTOF

We report the beam test and result of the sealed Multigap Resistive Plate Chambers (MRPC) for the external Time of Flight (eTOF) wall of the Cooler-strorage-ring External-target Experiment (CEE). The test stand detects the secondary charged particles produced from heavy ion collisions in the Heavy Ion Research Facility in Lanzhou (HIRFL), and it serves as a joint evaluation of the future CEE system, including the detectors, readout electronics, data acquisition, trigger system, etc. The collision is achieved by a Fe beam and a Fe target, with an estimated beam energy of 300 MeV/u. The sealed MRPC prototypes work stably during the test with a 20 sccm low gas flow. The whole test system is triggered from the channel multiplicity provided by the TOF detectors. A tracking method is implemented to the analysis in order to resolve the events with multiple tracks on the detectors. The result shows that the detectors reach 98% efficiency at their working point. With proper corrections, the time resolution is evaluated to be 60 ps, which fulfills the requirement to the eTOF wall.

Batch testing and noise rate optimization of MRPC3b for CBM-TOF/STAR-eTOF

The Compressed Baryonic Matter (CBM) experiment is one of the major scientific spectrometers of the future Facility for Antiproton and Ion Research (FAIR) in Darmstadt. As one of the core sub-systems in CBM experiment for charged hadron identification, the Time-of-Flight (TOF) system is required to have a time resolution better than 80 ps. According to the final state particle flux distribution, the CBM-TOF will be constructed with several types of Multi-gap Resistive Plate Chambers (MRPC). In the outer region of the TOF wall where the particle fluxes are around 1 kHz/cm2, MRPCs with ultra-thin float glass electrodes are considered as a cost effective solution. MRPC3b prototypes have been developed and tested with excellent performance which could meet all the requirements. Before the construction of CBM-TOF, approximately 80 MRPC3bs are assembled for the STAR endcap TOF (STAR-eTOF) upgrade at RHIC as part of the FAIR Phase-0 programs for CBM-TOF which provides a valuable opportunity for detector stability test under high flux environments. This paper will introduce the batch test of the MRPC3bs for STAR-eTOF upgrade. Time resolution of better than 70 ps and efficiency of around 95% are achieved. Notably, during the batch test, it has been observed that the noise rates of the two edge strips in each counter are significantly higher than those of the middle strips. Simulations with Computer Simulation Technology (CST) Studio Suite are carried out and several kinds of MRPC prototypes are designed and tested accordingly. Based on the simulation and test results, the design of the MRPC3b has been further optimized by modify the shape and position of High-Voltage injection pad and increasing the distance between the glass edge and both end strips, resulting in a significant suppression of noise rates in the edge strips.

The external time-of-flight wall for CEE experiment

A heavy-ion collision facility called the cooler storage ring (CSR) external-target experiment (CEE) is scheduled in Lanzhou, China. The time measurement of the charged particles at the forward angle will be conducted by the external time-of-flight (eTOF) subsystem, which is built with multigap resistive plate chambers (MRPC). This work describes the tasks, performance criteria, detector layout, and prototype test results while outlining the technical design and development status of the CEE-eTOF wall. The effectiveness of the wall design has been validated using a FairRoot-based simulation, which is an essential part of the verification. With a 3.2 times 1.6~textrm{m}^2 coverage, a 60 ps overall time resolution, and a 2.6 m distance from the collision point, the eTOF wall enables the particle identification, system triggering, and event selection in cooperation with other related detectors. A novel structure called sealed MRPC will be applied to the subsystem. The design considerations of this type, prototype test, and results are also described in this paper.

A conceptual design of TOF based on MRPC technology for the future electron–positron Higgs factory

Future electron–positron Higgs factories could provide excellent opportunities to examine the Standard Model and search for new physics with much higher precision than the LHC. A precise particle identification is crucial for the physics program at these future colliders and can be achieved via precise time-of-flight (TOF) measurements of the final state particles. In this paper, we propose a conceptual design of TOF system based on the multigap resistive plate chamber (MRPC) technology for future electron–positron Higgs factories. This TOF system will be characterized by a time resolution of < 35 ps, a total active area of 77 m2, and a construction budget of the order of 5 million USD.

Development of an 1-m long prototype TOF-RPC for the J-PARC [formula omitted]20 beam line

We have developed a prototype multi-gap Resistive Plate Chamber (RPC) for a time-of-flight (TOF) detector at the J-PARC π20 beam line. It is a double stack RPC with five 0.26-mm gas gaps in each stack. Its readout strips are 25 mm wide and 940 mm long. We have also developed an amplifier board which can be used for TOF-RPCs in general and carried out a beam test to evaluate the performance of the RPC and this new board. Timing measurements and a time-walk correction using a time-over-threshold (TOT) method were found to work well without stretching signals. We obtained time resolutions of 60-70 ps when the test particle’s position was determined using 5 mm × 10 mm trigger detectors and 65-80 ps without this position determination.

Development of a precise time and position resolution TOF-tracker MRPC for the [formula omitted]20 beam line at J-PARC

We are developing time-of-flight (TOF) multi-gap Resistive Plate Chambers (MRPCs) which perform both timing and hit position measurements, the TOF-tracker MRPC, for muon detection to measure exclusive Drell–Yan reaction (π−p→γ∗n→μ+μ−n) at J-PARC’s hadron hall. Here we report on the development of a prototype TOF-tracker MRPC with a sensitive area of 500×1000mm2 and its performance in an electron-positron particle beam at the SPring-8 synchrotron in Japan.

The ecological transition of the extreme energy events experiment

The need for reducing the emission of gases, potentially contributing to the greenhouse effect and climate change, has impacted many fields, including scientific research. The Extreme Energy Event (EEE) collaboration started, already several years ago, a series of tests aiming at finding a more eco-friendly replacement for the gases used in the Multigap Resistive Plate Chambers (MRPCs) of its network.These tests identified a promising binary gas mixture, and data taking has begun with a subset of the telescopes of the EEE network, making EEE the first experiment in the world completely implemented with MRPCs and operating with an eco-friendly gas mixture. Here the results of the tests and a preliminary comparison of the telescope performance measured with the standard (non eco-friendly) and the new eco-friendly gas mixtures are presented and discussed.

R & D of prototype iTOF-MRPC at CEE

The cooling storage ring (CSR) external-target experiment (CEE) is a spectrometer running at the Heavy Ion Research Facility (HIRFL) at Lanzhou. The CEE is the first large-scale nuclear physics experimental device by China to operate in the fixed-target mode with an energy of ∼1 GeV. The purpose of the CEE is to study the properties of dense nuclear matter. CEE uses a multi-gap resistive plate chamber (MRPC) as its internal time-of-flight (iTOF) detector for the identification of final-state particles. An iTOF-MRPC prototype with 24 gaps was designed to meet the requirements of CEE, and the readout electronics of the prototype use the FPGA-based time digitization technology. Using cosmic ray tests, the time resolution of the iTOF prototype was found to be approximately 30 ps. In order to further understand how to improve the time resolution of MRPC, ANSYS HFSS was used to simulate the signal transmission process in MRPC. The main factors affecting the timing performance of the MRPC and, accordingly, the optimization scheme are presented.

Resistive plate chambers for precise measurement of high-momentum protons in short range correlations at R[formula omitted]B

The Reactions with Relativistic Radioactive Beams (R3B) collaboration of the Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany, has constructed an experimental setup to perform fundamental studies of nuclear matter, using as a probe reactions with exotic nuclei at relativistic energies. Among the various detection systems, one of the most recent upgrades consists of the installation of a large area, around 2 m2, multi-gap Resistive Plate Chamber (RPC). The chamber is equipped with twelve 0.3mm gaps and readout by 30mm pitch strips, exhibiting a timing precision down to 50 ps and efficiencies above 98% for minimum ionizing particles in a previous characterization of the detector. The RPC was part of the setup of the FAIR Phase 0 experiment that focused on measuring for the first time, in spring 2022, nucleon–nucleon short-range correlations (SRC) inside an exotic nucleus (16C). The excellent timing precision of this detector will allow the measurement of the forward emitted proton momentum with a resolution of around 1%. In beam measurements show an RPC efficiency above 95% and a time precision better than 100 ps (including the contribution of a reference scintillator and the momentum spread of the particles) for forward emitted particles.

Development of a sealed MRPC with mylar spacers for high luminosity TOF systems

The high luminosity Time-of-Flight (TOF) systems call for timing detectors with both good time resolution and adequate rate capability, which have been fulfilled by the Multigap Resistive Plate Chamber (MRPC) assembled with low-resistive glass electrodes. However, recent tests and operations with high rate MRPCs have given evidences to the luminosity effects, such as the dark current rise and related higher noise rate, which may vitiate the stability in experimental operations. This work discusses the results from observations and tests, and infer the fishline spacers as a source of dark current and noise problems. Then, a sealed MRPC with mylar spacers is proposed, developed and tested. The prototype showed good luminosity tolerance during the X-ray test, and its performances of 95% efficiency and 80 ps time resolution have been validated in cosmic tests.

Glass multi-gap RPCs for photon-transmission imaging

In the present R&D, multi-gap resistive plate chambers (MRPCs) are studied for photon non-destructive inspection of small airport baggages and cargos. Six-gap RPCs for line-scan operations are constructed with soda-lime glass with a thicknesses of 0.53 mm. The typical detector characteristics such as the operation high voltage (HV), the efficiency, and the strip multiplicity are measured by using 661.7 keV photons emitted from a 137Cs source with a current activity of 4.74 GBq. The efficiency for the 661.7 keV photons measured by the MRPC detector at the HV applied to obtain the photon-transmission images is 5.5%, which is about 84% of that predicted by a GEANT simulation. To demonstrate the quality operation of the MRPC detectors, we conduct line-scan operations for various objects and produce the photon-transmission images that barely identify 2 mm-thick stainless steel objects when measured with a color depth (contrast) of the image pixels of about 100.

Development of a sealed MRPC with high time resolution

Multi-gap Resistive Plate Chambers (MRPC) are used in the Solenoidal Large Intensity Device (SoLID) at Jefferson Lab (JLab) to identify kaons. SoLID requires 20 ps for the total time resolution. In this paper, a sealed MRPC (sMRPC) prototype with 4 stacks and 7 uniform gas gaps is designed to reach a good time resolution. At the same time, sMRPC can lower the airflow through the chamber to reduce the greenhouse pollution. Both analog signal discrimination & TDC electronic system and waveform sampling electronic system are used for the readout of the signal. In cosmic tests, we compared the time resolution of these electronic readout methods and measured the efficiency of the sealed MRPC. The preliminary result shows that the MRPC prototype has an efficiency higher than 95%. The sealed MRPC prototype using waveform sampling system, has a time resolution of 40 ps, while a 54 ps time resolution is obtained using analog signal discrimination & TDC electronic system.

A large-area MRPC detector for muon scattering tomography

A muon telescope equipped with four multi-gap Resistive Plate Chambers of 2 m2 per plane was tested with the muon scattering tomography technique. The telescope was operated during several hours with high atomic number materials located at its center with two detector planes on each side. With an intrinsic efficiency above 98%, spatial resolution around 1 cm and detector planes spaced by 45 cm, it was possible to identify the presence of a 5 cm thick tungsten block in 10 min of acquisition. The results obtained after five hours of acquisition are also presented in this communication.

Aging suppression, high time resolution and 2D-position sensitive Multi-Strip Multi-Gap Resistive Plate Counter for high rate experiments

The multi-strip, multi-gap resistive plate chambers (MSMGRPCs) of the Time of Flight (TOF) wall of the Compressed Baryonic Matter (CBM) experiment will be exposed to challenging counting rates, up to 50 kHz/cm2. The unprecedented requirement to the CBM-TOF chambers to keep their performance (efficiency over 90% and system time resolution better than 80 ps) at these high counting rates has triggered the development of a new generation of MSMGRPCs with increased counting rate capabilities and suppression of aging effect in high irradiation environment. The MSMGRPCs designed for the low polar angles region of the CBM-TOF wall, besides performing in high counting rate, should also maintain their performance over the lifetime of the experiment. Detailed aging investigation evidenced mainly a gas pollution effect for the chambers with gas exchange via diffusion, enhanced around the spacers. In order to mitigate this phenomenon, a MSMGRPC prototype with a direct gas flow through the gas gaps and a reduced number of spacers in the electric field was developed. Assembling and tests of such prototypes as well as the results of the first aging investigations performed exposing the chamber to a high intensity X-ray flux at different gas flow rates and gas mixtures are reported.